Samsung dishwashers are known for their performance, efficiency, and advanced technology. However, like any appliance, they can encounter issues from time to time. Samsung dishwashers come with a built-in diagnostic system that displays error codes to help users identify and resolve problems. This article will walk you through the most common error codes and their respective solutions, helping you get your dishwasher back up and running in no time.
Samsung Dishwasher Error Codes
1. Error Code 1E or IE: Water Level Sensor Issue
This error code indicates a problem with the water level sensor. The dishwasher may not be filling properly, or the sensor could be faulty.
Solutions:
– Ensure that the water supply is turned on and that there are no kinks or blockages in the hose.
– Inspect the water inlet valve for debris or damage and clean or replace as needed.
– If the problem persists, the water level sensor may need to be replaced. Contact a qualified technician for assistance.
2. Error Code 3E or 3C: Motor Malfunction
This error code signifies an issue with the dishwasher’s motor. It could be due to a poor connection, a damaged motor, or a faulty control board.
Solutions:
– Unplug the dishwasher and check the wiring connections between the motor and the control board. Reconnect any loose wires or replace damaged ones.
– If the wiring is intact, the motor may need to be replaced. Consult a professional technician for this task.
– In case the motor is working correctly, the control board may be the issue and should be replaced by a technician.
3. Error Code 4E or 4C: Insufficient Water Supply
This error code indicates that the dishwasher isn’t receiving enough water to operate correctly.
Solutions:
– Verify that the water supply valve is fully open.
– Check the water supply hose for kinks, blockages, or damage, and address any issues found.
– Inspect the water inlet valve for debris or damage and clean or replace it as needed.
– If none of these solutions work, contact a technician for further assistance.
4. Error Code 5E or 5C: Drainage Issue
This error code signifies that the dishwasher is unable to drain properly, which could be due to a blockage or a faulty drain pump.
Solutions:
– Inspect the drain hose for kinks or blockages and clear any obstructions.
– Check the drain pump and filter for debris and clean them as necessary.
– If the problem persists, the drain pump may need to be replaced. Contact a qualified technician for help.
5. Error Code 7E: WaterWall Reflector Malfunction
This error code is specific to Samsung dishwashers with the WaterWall feature. It indicates a problem with the WaterWall reflector, which may be stuck or experiencing motor issues.
Solutions:
– Check for any debris or objects obstructing the WaterWall reflector and remove them.
– Inspect the reflector motor for damage and replace it if necessary.
– If the issue continues, contact a technician for further assistance.
6. Error Code 9E: Low Water Level
This error code suggests that the dishwasher has detected a low water level, which could be due to a water supply issue or a faulty water level sensor.
Solutions:
– Ensure that the water supply valve is open and that there are no blockages or kinks in the hose.
– Inspect the water inlet valve for debris or damage and clean or replace it as needed.
– If the problem persists, the water level sensor may need to be replaced. Contact a qualified technician for assistance.
7. Error Code CE: Communication Error
This error code indicates a communication error between the control board
and the user interface panel. This could be due to a loose connection or a faulty control board.
Solutions:
– Unplug the dishwasher and check the wiring connections between the control board and the user interface panel. Reconnect any loose wires or replace damaged ones.
– If the wiring is in good condition, the control board or user interface panel may need to be replaced. Consult a professional technician for this task.
8. Error Code HE1 or HE: Heating Element Issue
This error code signifies a problem with the dishwasher’s heating element, which could be due to a faulty element, thermostat, or control board.
Solutions:
– Unplug the dishwasher and inspect the heating element for visible damage. Replace it if necessary.
– Check the thermostat for proper functioning and replace it if required.
– If the heating element and thermostat are in good condition, the control board may be the issue and should be replaced by a technician.
9. Error Code LE or LC: Leak Detected
This error code indicates that the dishwasher has detected a leak, which could be due to a damaged hose, a faulty door seal, or a leaky component.
Solutions:
– Inspect the door seal for damage or wear and replace it if needed.
– Check the hoses and connections for leaks, tightening or replacing them as necessary.
– If you cannot locate the source of the leak, contact a professional technician to diagnose and repair the issue.
10. Error Code oE or OE: Overfilling
This error code signifies that the dishwasher is overfilling with water, which could be due to a faulty water level sensor, water inlet valve, or control board.
Solutions:
– Check the water level sensor for proper functioning and replace it if required.
– Inspect the water inlet valve for debris or damage and clean or replace it as needed.
– If the issue persists, the control board may need to be replaced. Contact a qualified technician for assistance.
Conclusion:
Samsung dishwashers are designed to provide a reliable and efficient cleaning experience. However, should you encounter any error codes, this guide should help you diagnose and resolve common issues. Always remember to disconnect the power supply before attempting any repairs, and consult a professional technician when in doubt or for more complex problems. With proper care and maintenance, your Samsung dishwasher should continue to provide you with years of service.
